Take me home
SCi:
CDi3.FTe Submersible, Universal Gas-Field Controller
Keller Digital Pressure Transducers/Transmitters
Burkert Solenoid Modifications
PDL/CDi History: Pembina Lake Erie Datalogger
LD Series Pressure Transmitters
Solar Cells
ICISS Corrosion Datalogger
Supplies, Potting
P5 / P7 Charger
Parts:
Keller Digital Pressure Transducers/Transmitters
Software
PDL5 Switcher, NPT Cylinders
RF Parts
Software
Modem Parts
Private Natural Gas Section: CDiComm, CDiDemo, CDiChart, WinRTMS, Visual Flow Calculator, and Switcher3 Software Bundle
Indefinitely shelved, not for sale. Locked and put away at LoggerLand5, partial unlock code is "neene". Adam, 2017/11/25. Additional information, such as decryption keys, is only available to SCi.RS members. Adam, 2018/Jan/05.

All versions of the Switcher software are no longer supported as Switcher has been superceded by CDiComm and CDiChart, however, Switcher3 is included in this software bundle because it must be used in order to upload new firmware to make older devices compatible with CDiComm and/or CDiDemo. Current versions:

  • CDiComm v1.0.0, is visual operational, communications and charting functionality software for serial devices connected to the local computer through a cable, or across the internet through a serial to Ethernet TCP/IP bridge. Supports up to 256 serial physical or virtual ports, COM1 to COM256, and "on the fly" switching between ports and baud rates. CDiComm supports the SCi Command Set and is compatible with these and these.
  • CDiDemo v1.0.0 has all the capability of CDiComm but supports the Demo Command Set, more on this later.
  • CDiChart v1.0.3, is a charting tool and native file viewer. Freeware, but should be registered during the 30-day trial period. Email Adam the installation code (email link at page bottom), or Skype the skypename singlechips, and you'll get a response with the unlock code. Once unlocked, fonts go back to normal and the nag screen goes away.
  • WinRTMS v1.9.9 is the application software for P5 and P4.5 hardware that may still be around.
  • Visual Flow Calculator v3.0.3 is a freeware natural gas flow calculation utility.
  • Switcher3 v3.x.x supports the old "DELP" commands, is compatible with these and these and these and these, all of which are obsolete and unsupported.

All six programs are 32-bit applications. In addition to the traditional .msi installer, a portable version of all six titles has been created, in a single "packaged" file, using Cameyo virtualization technology, see https://www.cameyo.com/. Virtualization allows software to run in the browser on any device without any code changes, so it is definitely worth a try. This zip bundle includes the latest Switcher3, WinRTMS, CDiChart, Visual Flow Calculator, CDiComm and CDiDemo. Proceed as follows:

  1. I like a clean Desktop, most of the time, so I also like the Quick Launch Toolbar so these instructions assume the feature is enabled on your computer, so now your Desktop looks like this. Download the zip and extract contents to the Desktop, password is "CDi" without the quotes, Desktop now looks like this.
  2. Make a desktop shortcut to the executable in the CDi.pData folder named "CDi6Pv1.2.exe", Desktop now looks like this.
  3. Change the shortcut icon and drag to the toolbar, Desktop now looks like this.
  4. Click the new icon to start the program, pick one of the options that come up, never check "Remember my choice".
  5. Notice the six new icons you now have on the Quick Launch Toolbar, the virtualization engine creates these and five corresponding ones in the Start Menu, they exist in the current session, so until you reboot the computer use these icons to start the programs. After you reboot the computer these will have disappeared, use the "SCi" icon to start the whole thing over.
  6. Please leave the CDi.pData folder on the Desktop, things will not work if it is moved, Adam 2018/01/28.

γειά σου!!!Please turn the volume down before you click on this link, a plunger lift demo from over 10 years ago, it is loud!
Private Corrosion Section: CDi2
ICISS unit with protective cover
Additional information and decryption keys is only available to SCi.RS members. Adam, 2018/Jan/05. Internal name is CDi2, a traditional .msi installer is here, you can download the portable vesion here, follow steps 1 to 6 as above, unzip password is "CDi" without the quotes.
Public Section, Freeware, etc.
Software
Click to download zipped file!!!
DIGI X-CTU 5.2.7.5
Digi International X-CTU Version 5.2.7.5 installer 32bit
Click on icon to download EXE installer
XCTU Version 5.1.4.1
DIGI X-CTU 5.1.4.1
Digi International X-CTU Version 5.1.4.1 installer
Click on icon to download EXE installer
XCTU Version 5.1.4.1
DIGI X-CTU 5.1.0.0
Digi International X-CTU Version 5.1.0.0 installer
Click on icon to download EXE installer
Keller Read30
Zip archive, click icon to download
Visual Flow Calculator 3.03
Contact:
SingleChips Cloud 2SingleChips Cloud 1SingleChips GreeceSingleChips CanadaFollow us on TwitterFollow us on YouTubeLike us on Facebook
Copyright © 1991-2018 AdamG Last Update: Friday, September 21, 2018 5:24:25 PM